Announcement
ClassifyAnnouncement
The patron saint who follows you around! Put your car in a Marine special car to remove the protective film.
Source：本站 Time：2023/10/8 14:49:20 frequency：
Most imported cars must be sealed before transportation, which is to resist the damage of the sea water and other factors on the body during transportation. However, the vehicle wax to use wax water, not to mention the damage of this solvent to the car paint, the light wax labor costs are a lot, after all, the wool is in the sheep, and ultimately the consumer pays.
Imported cars open in wax
What if we changed that? Today, Xiaobian gives you a special Marine car that can remove the protective film, which can prevent the car from corrosion by opening wax water at the same time, and can greatly reduce the labor cost of opening wax. Just remove it easily, and the car is bright and clean as new!
Paste without foaming, tear off without residual glue
In many cases, when we put the protective film on the car, it is always not well fixed on the car body, and after a long time of high temperature or exposure, it is easy to cause the surface of the protective film to wrinkle or residual glue, and it is not easy to tear off and replace the body.
However, this Marine special car can remove the protective film, better fit the body curve, all-round protection of the body, and this protective film is simple to operate and easy to cut. The surface mesh design of the protective film makes the cutting more accurate, and at the same time, it is more breathable and fit, reducing the possibility of bubbles and wrinkles, and ensuring that the car surface is more flat. Even if it is pasted under high temperature conditions, it will not remain glue when torn off.
High temperature resistance, corrosion resistance, sun protection
In the hot summer and high temperature on the way to the sea, high-intensity, long-term exposure is easy to cause the car surface film bubbles, warpage Angle, but if you can paste this mobile car protective film, the situation will be very different.
Removable protective film with excellent resistance to high temperature and corrosion. After professional research and development and testing, this protective film can withstand summer sunlight, above 120 ° C will not appear deformation, oxidation or fading problems, can ensure a long time to maintain a stable appearance and quality under high temperature conditions. The rubber surface itself is corrosion-resistant, and even if it encounters seawater on the way to sea, the body can be well protected from corrosion.
Patent protection, safe and assured
Many times, in order to ensure the beauty and cleanliness of the new car, some businesses will worry about whether the glue contains solvents, causing corrosion and damage to the car paint itself.
Using removable protective films eliminates these concerns. Because the removable protective film adopts vector movable technology, has professional patent protection, 100% solid content, does not contain solvent, no harm to the body, the composition is safe, does not leave any odor and residual glue, and can still be used safely under high temperature conditions.
After reading this article, I believe that you have a deep understanding of the benefits of removing the body protective film. If you want to know more, you can scan the code for more information!
Copyright © 2023 Dongguan Xuchen Environmental Technology Co., Ltd. Copyright Reserved
ICP：粤ICP备2021160255号