In the furniture manufacturing industry, materials such as protective film, decorative film and label are often used. According to the feedback of many furniture industry bosses, the labels and decorative film materials they buy have many drawbacks, or they are too sticky, so that they need to spend a lot of effort to remove glue stains; Otherwise, the viscosity is weak, easy to warp, age, and finally fall off.

　　The huge market needs a truly removable, tear off no residual glue and can take into account the high viscosity of the new printing bonding material, this exhibition will introduce you a bamboo and wood special removable adhesive material, high viscosity at the same time can take into account the removal of non-residual glue, take a look!

01 Reduce the cost of wood loss

　　Now more and more people like to buy mahogany furniture, mahogany furniture not only has value but also has collection value, but at the same time the production cost is high, it will inevitably bump in the transportation process, once scratched it can really be a heavy loss, it is not good to repair, so many people will paste a protective film on the furniture. When the ordinary protective film is torn down, it will leave residual glue or not stick tightly, which will destroy the overall beauty, and seriously damage the surface of the product, resulting in the product being unmarketable.

　　With our new printing bonding material, the above problems can be solved, on the one hand, it can be firmly bonded, not easy to warp and aging; On the other hand, tear off no residual glue mark offset, do not worry about the damage caused by cleaning the wood with organic solvents.

02 Removable adhesive can be both high viscosity and removable

　　Now the self-adhesive label used in the furniture industry can be removed in a short time, but it can not fully meet the needs of the industry in terms of viscosity, this adhesive material generally has a long curing time, weak water resistance, poor initial viscosity, poor fluidity, there are slight water or oil stains on the paste, the hydrosol is also difficult to play its viscosity, and the bonding strength of the difficult material with small polarity is not ideal.

　　However, the 0111 new printing bonding material is the selection of vector movable formula glue, which can take into account the high viscosity and achieve the true non-residual glue over time, so that it can be truly removed. In addition, we take into account the high temperature weather during production or transportation, and add a high temperature resistance formula to the removable adhesive material for bamboo and wood products, so that it can still play a high viscosity and removal at a high temperature of 150 degrees.

03 Environmentally friendly glue, no pollution, no irritating taste

　　Our research found that most of the label materials on the market are made of oil glue or water glue, oil tape has corrosion type, the lower the solid content, the greater the smell of oil glue, the glue itself is flammable, the smell is easy to stimulate the respiratory tract, long-term contact requires wearing a mask, and the operation site is well ventilated, due to the use of oily solvents, is not conducive to environmental protection, but also easy to affect health.

　　Our new printing bonding material adopts environmentally friendly synthetic resin, no pollution, no toxicity, high temperature resistance, no deformation, no residual glue, long service life, reusable. Products using special research and development glue, vector mobile technology, carefully made, real pollution-free, workers can rest assured that the master bonding use.

If you want to know more, you can scan the code for more information!