你敢相信吗？过年、办喜事等日子总会用到气球装饰品来布置背景墙，但就是这样轻便的小东西，好多人的感受就是——没想象中的好粘，总是掉下来？！
其实，气球粘接问题是很常见的挑战，虽然气球体积大，但其与墙面真正粘接面积只有一个点；其次，摸上去粘性越大的双面胶实际上越难粘住气球，这是由胶系决定，为此，0111特地研发粘接气球专用胶带，将气球粘接难的问题解！决！了！
01 准备粘接面
在将气球粘贴到腻子墙或其他表面之前，确保表面干净、干燥和光滑。可以使用清洁剂擦拭表面，以去除油脂、灰尘和其他杂质。
0２ 选择气球专用胶带
对于气球的粘接，这是最为关键的一步，选择一款能越粘越牢固的气球专用可移除泡棉胶带，为粘接提供足够的粘性，并且粘接墙面一侧为可移除面，粘在腻子墙等材料上不上墙、撕下还不残胶，省了清理残胶的麻烦。
03 使用多点固定
单一的粘接点很有可能导致气球掉落。考虑通过使用多个粘接点来固定气球，这样可以均匀分散重量并提高粘接的稳定性。将粘接剂分别涂在气球底部的几个点上，并将它们粘贴到表面上。
04 压实粘贴点
在将气球粘贴到表面之后，轻轻按压每个粘接点，确保气球专用可移除泡棉胶带充分接触并牢固固定气球。这将有助于加强粘接，使气球能够更牢固地粘在表面上。
看完这篇，以后粘接气球就再也不担心会脱落啦！如果还想了解更多，可以扫码了解更多资讯！
The balloon adhesion problem that you didn’t even notice has been solved by us!
Can you believe it? Balloon decorations are commonly used to decorate background walls during festive occasions and celebrations, but many people feel that these lightweight items are not as sticky as they imagined and always fall off.
In fact, balloon adhesion is a common challenge. Although balloons have a large volume, their actual contact area with the wall is only a single point. Moreover, the stickier the double-sided tape feels, the more difficult it is to stick to the balloons, which is influenced by the type of adhesive used. Therefore, 0111 has developed a special adhesive tape for attaching balloons, which solves the problem of poor adhesion!
01 Prepare the adhesive surface
Before attaching the balloons to a plastered wall or other surface, ensure that the surface is clean, dry and smooth. You can use a cleaner to wipe the surface and remove grease, dust, and any impurities.
02 Choose balloon-specific adhesive tape
This is the most critical step in balloon adhesion. Choose a balloon-specific removable foam adhesive tape that can provide enough adhesion to make the attachment more secure. The adhesive on one side of the tape should be removable, so that it can be easily removed from the wall without leaving any glue residue.
03 Use multiple points of fixation
A single attachment point is likely to cause the balloon to fall off. Consider using multiple attachment points to fix the balloon to the surface, which can evenly distribute weight and improve adhesion stability. Apply the adhesive tape to several points on the bottom of the balloon and then stick it to the surface.
04 Press the adhesive points firmly
After sticking the balloon to the surface, gently press each attachment point to ensure that the balloon-specific removable foam adhesive tape is in full contact and firmly fixed to the balloon. This will help enhance adhesion and make the balloon stick more securely to the surface.
After reading this, there's no need to worry about balloons falling off again when you attach them!
